Manual

PressthePOWERbutton@ontheremote,orfrontof the
unit,to turn onthe unit;the POWERindicatorwill light
yellow.PresstheTV/AVbutton@repeatedlyto selectthe
TVmode.If theunitis in DVDmode,presstheTV/DVD
button@first,thenpresstheTV/AVbuttonrepeatedlyto
selectTVmode.
.......,_\_7
LJ
Adjust the volume level by pressing the VOLUME Up @ or
Down @button.
NOTES:
When ANTENNA option is set to AIR, only channels
up to 69 can be chosen. When set to CABLE,
channels up to 125 can be chosen.
OPTIONS
TV: If using a
VHF/UHF
antenna.
CATV: If using Cable
TV.
Change the Antenna option to select between TV or CATV.
Select AIR if using VHF/UHF antenna, and select CATV if
using Cable TV (see page 25, steps ! and 2).
Lj'
For proper operation, before selecting channels, they must
be set into the unit's Program memory, see page 25.
Press and release the CHANNEL Up @ or Down @ button.
The unit automatically stops at the next channel set into
memory.
Direct Program Selection/Number buttons (0-9) @
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press 1-9 @ as desired.
For Channels 10 through 99, press -/-- button O once,
then enter the 2 digit channel number in order.
For Channels 100 through 125, press -/-- button O twice,
then enter the 2 digit channel number in order.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
The TV/CATV option must be set to CATV when using cable, see step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
36