Specifications

Helpline No. UK

North Ireland 0870 727 0370 Rep. Ireland 1-800-992 508

Web Support www.medion.co.uk

Model Number: 30324

Remove base

The base of the device is fixed to the rear with six

screws.

1. Undo the six screws with a cross-head

screwdriver.

2. Lift up the device, away from the base.

Fixing the steel rails to the wall

1. Select a location on the wall where there is sufficient distance between the LCD-TV and other objects

(see section Point of use).

Bear in mind that the hanging elements on the rear of the device will fit into the narrow ends of the

hanging openings in the steel rails.

2. Mark the eight drill holes in the wall with the supplied drill template.

3. Drill the eight holes for the raw plugs in the wall.

4. Insert the raw plugs.

ATTENTION!

The raw plugs must fit tightly! Do not hang the device on the wall if the raw plugs are not

tightly fixed.

5. Attach the two steel rails each with four screws. The narrow sides of the hanging openings must face

downwards.

6. Now you can hang the LCD-TV on the steel rails.