Specifications
Helpline No. UK
/
North Ireland 0870 727 0370 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 30324
34
Automatic search
If your device does not respond to the remote control, even though you have tried all of the codes listed for
your device type and the relevant brand, then try using the automatic search. This will enable you to find codes
for brands that were not listed in the device Code List.
1. Switch the relevant device on manually.
2. Keep the
CODE
key pressed for approx. 3 seconds until the red LED remains solid.
3. Briefly press the required source key (
TV
,
SAT
,
AUX
).
4. Point the remote control at the device and briefly press the button
P/CH +
once.
5. If the device has no program function, press
P/CH +
or STANDBY instead.
6. The remote control starts the code search after 6 seconds and transmits all codes consecutively at 1-
second intervals. The source key will light up for each transmission.
7. As soon as the device responds to the remote control, press
OK
. – If you did not press
OK
at the right
time, you can return to the code to which the device responded step by step by pressing
P/CH -
key.
To cancel the search, press
EXIT
.
1 second or 3 second intervals
If you want the remote control to transmit a new code every 3 seconds instead of every second, proceed as
follows:
Within 6 seconds of pressing the
P/CH +
(or STANDBY) key as described in Point 4 press the
P/CH +
or
P/CH -
key again. The remote control will now only transmit a new code every 3 seconds. This gives you more
time, but the procedure will also take longer.
Code searching by brand name
This function gives you the option of searching by brand name (see code list). This is done as follows:
1. Switch the relevant device on manually.
2. Keep the
CODE
key pressed down for approx. 3 seconds until the background lighting of the source
key briefly flashes and then remains on.
3. Briefly press the required source key (
TV
,
SAT
,
AUX
).
4. Enter the one-digit code according to the following table:
Key 1 = Medion, Tchibo
Key 2 = Philips, Radiola, Philco, Erres, Pye
Taste 3 = Sony, Akai, Panasonic, JVC, Sharp, Toshiba, Daewo
Key 4 = Thomson, Brandt, Fergusson
Key 5 = Saba, Nordmende, Telefunken
Key 6 = Grundig, Blaupunkt
Key 0 = all brands.
5. Continue pressing the
P/CH +
key, until the device responds accordingly. Proceed quickly; otherwise
the automatic code search will start.
6. Save the code by pressing
OK
.
If all the codes have been searched, the source key will flash for approx. 3 seconds.