Specifications

Helpline No. UK
/
North Ireland 0870 727 0370 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 30324
12
Basic Functions
Turning the LCD TV on and off
1. Press the on/off switch on the back of the device. The stand-by mode will be activated and a blue light
on the front will come on.
2. You can switch on the device by pressing a
digit key on the remote control or a P/CH channel
selection key on the remote control or on the device itself. The light on the front will go out.
3. You can put the device back into stand-by mode with the stand-by key on the remote control or with the
stand-by key on the right side of the device.
4. Press the on/off switch on the back of the device again to switch the device off completely.
After switching on for the first time
When you switch your LCD-TV on for the first time, the Auto
Programm menu will appear in English.
• If you wish to change the pre-set country setting, set the
required country with the
 directional key. The
country setting has an effect on the sequence in which
channels are stored.
• Then select if necessary the Language message with the
directional key
and choose the required language
with the
directional keys.
• If you wish to change the pre-set for the video text
language, use the directional key to select the
message TXT Language (Language for teletext) and use the
directional keys to select the
required language region Westen, Ost (East), Turk/Gre (Turkish/Greek), Kyrillisch or
Arabisch.
• Then confirm the message "CHECK ANTENNA CABLE" by pressing the
OK key or pressing the red key.
• You can cancel this process by pressing the blue key.
Automatic channel seeking
Automatic channel seeking will now commence. This takes a
few minutes.
You can cancel this process with the
blue key .
The channels are stored in a country-specific sequence in the
channel locations. It is possible to store a maximum of 100
channels.
After automatic storage of channels is complete, the program table will be displayed. If this table is not
modified further, it will close after a few minutes. The channel on channel location 1 will appear.
Channel Search
• You can select a channel by pressing the P/CH key (on the device or on the remote control) or by
selecting the channel directly using a digit key.
• For a number with two digits first press the -/-- key.
• You can select the most recent displayed channel with the
P<P/SWAP key.
6