Service manual

3-30 Tires and Wheels Suspension
2006 LSSV Service Manual Supplement
Service/Maintenance Information
1. Check the latch isolator (2) for damage, replace as
required.
2. Thoroughly clean the latch casting surfaces and bond the
NEW isolator in place using Loctite Black Max 380®
adhesive or equivalent.
3. Check for operation and apply Teflon dry lube GM P/N
12371287 (Canadian P/N 10953437) to the latch
mechanism (1) as required.
Assembly Procedure
1. Install the latch mechanism isolator, if necessary.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the latch mechanism isolator screws.
Tighten
Tighten the screws to 9 N•m (80 lb in).
3. Install the latch mechanism, if necessary.
4. Install the latch mechanism bolts, spacers, and nuts.
Tighten
Tighten the bolts to 25 N•m (18 lb ft).