Service manual

Body and Accessories Lighting Systems 8-115
2006 LSSV Service Manual Supplement
Blackout (B/O) Taillamp Replacement
(LSSV)
Removal Procedure
1. Ensure all lamp switches are in the OFF position.
2. Remove the wiring harness strap from the taillamp
harness.
3. Disconnect the taillamp harness connector (1) by
releasing the tab.
4. Remove the nuts (2) and the ground connector (3) from
the rear of the bumper.
5. Remove the taillamp (1) from the bumper.
Installation Procedure
1. Position the taillamp (1) onto the bumper.