Service manual

Body and Accessories Interior Trim 8-73
2006 LSSV Service Manual Supplement
Upper Cab Mount Gun Rack Replacement
Removal Procedure
1. Remove the lower rear window molding. Refer to Molding
Replacement – Rear Window Lower in Interior Trim in
the 2006 C/K Truck Service Manual.
2. Remove the bolts (1) holding the upper mount to the
inner body.
3. Remove the upper gun rack (2).
Installation Procedure
1. Install the upper gun rack assembly (2) by aligning to the
body side inner upper panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts (1) to the assembly.
Tighten
Tighten the bolts to 8 N•m (70 lb in).
3. Install the lower rear window molding. Refer to Molding
Replacement – Rear Window Lower in Interior Trim in
the 2006 C/K Truck Service Manual.
Pioneer Tool Kit Bracket Replacement
Removal Procedure
1. Remove the lower rear window molding. Refer to Molding
Replacement – Rear Window Lower in Interior Trim in
the 2006 C/K Truck Service Manual.
2. Remove the pioneer tool kit.
3. Remove the 4 bolts (1) holding the bracket to the inner
body.
4. Remove the left bracket (2) or the right bracket (3).