Service manual

8-64 Instrument Panel, Gages, and Console Body and Accessories
2006 LSSV Service Manual Supplement
2. Route the air line through the I/P in the same location as
removed.
3. Install the air line (2) onto the flow gage (1).
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the accessory panel (2) onto the I/P and install
bolts (1).
Tighten
Tighten bolts to 8 N•m (71 lb in).
5. Push the I/P cluster bezel back in place over the panel.
6. Route the air line (2) through the engine compartment as
removed.
7. Secure line using the clip (1).
8. Push the line (2) onto the tube adapter (3).