Service manual

8-26 Bumpers Body and Accessories
2006 LSSV Service Manual Supplement
3. Install the bumper bolts (1).
Tighten
Tighten bumper bolts to 97 N•m (72 lb ft).
4. Install the rear D-ring (2) from the appropriate side. Refer
to Rear D-Ring Bracket Replacement (LSSV) in Frame
and Underbody.
5. Remove the supports and lower the vehicle.
Bumper Replacement – Rear (LSSV)
Removal Procedure
1. Remove the swing away spare tire carrier pivot bracket
(4) (if equipped). Refer to Spare Tire Carrier Pivot
Bracket Replacement (Swing Away) in Tires and Wheels.
2. Remove the swing away spare tire carrier latch (2) (if
equipped). Refer to Spare Tire Carrier Latch
Replacement (Swing Away) in Tires and Wheels.
3. Remove the rear D-ring brackets (3). Refer to Rear D-
Ring Bracket Replacement (LSSV) in Frame and
Underbody.
4. Remove the rear blackout (B/O) taillamps (1). Refer to
Blackout (B/O) Taillamp Replacement (LSSV) in Lighting
Systems.
5. Remove the license plate lamp (2). Refer to License
Plate Lamp Replacement (LSSV) in Lighting Systems.
6. Remove the license plate bracket (1). Refer to License
Plate Bracket Replacement.
7. Remove the rear step pad (if equipped). Refer to Step
Pad Replacement – Rear Bumper.