Service manual

Body and Accessories Bumpers 8-19
2006 LSSV Service Manual Supplement
Repair Instructions
Center Radiator Grille Brush Guard
Replacement
Removal Procedure
1. Remove the blackout (B/O) headlamp. Refer to
Headlamp Replacement – Blackout (B/O) (LSSV) in
Lighting Systems.
2. Remove the slave receptacle. Refer to Slave Receptacle
Replacement (LSSV) in Engine Electrical.
3. Remove the bolts (1) retaining the center brush guard to
the bumper.
4. Remove the center brush guard from the vehicle.
Installation Procedure
1. Install the center brush guard to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts (1) retaining the brush guard to the
vehicle.
Tighten
Tighten the bolts to 20 N•m (15 lb ft).
3. Install the slave receptacle. Refer to Slave Receptacle
Replacement (LSSV) in Engine Electrical.
4. Install the blackout (B/O) headlamp. Refer to Headlamp
Replacement – Blackout (B/O) (LSSV) in Lighting
Systems.
Outer Radiator Grille Brush Guard
Replacement
Removal Procedure
1. Remove the center brush guard. Refer to Center
Radiator Grille Brush Guard Replacement.
2. Remove the bolts (1) retaining the brush guard end to the
bumper.
3. Remove the brush guard end from the vehicle by lifting
up off of the mounting posts.