Manual

Chapter 2 Installing the LCD TV

Use an antenna cable to connect the TV signal to the LCD TV's TV CABLE terminal.

Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.

This TV is equipped with a safety fuse. In the event of an electrical storm or power outage

the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by

prying the cover off, following the illustration below.

If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time

Lag Fuse (Slow Blow) to replace the fuse.

Firm Plastic Prying Tool

(Using a metal toot ma

Back of TV

4A 250V

5x20mm

Fuse

O Press the _ button on the remote to turn on the LCD TV.