Flat Panel Television User Manual

Chapter 2 Installing the LCD TV

 Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to select

TV and press the OK button.

 Press the OK button to display the received channel list, then press ▲▼ to select a

channel. Or, use the ▪ (INPUT button) with 0-9 buttons to select digital channel( for

example 9.1)

The digital main channel might include many subchannels (for example 9-1, 9-

2..) that are showing program at the same time.

The Channel Scanning will create a list of receivable channels for the current

input (antenna or cable). You will be required to run Channel Scanning for each

RF input to create a list of available channels from both inputs.

 Press the MENU button on the remote control to display the Main menu, and use the

◄► buttons to select the TV.

 Press the ▼ button to select Channel Scan, and press the OK button.

The Channel Scan automatically creates a list of receivable channels. Press the MENU

button at any time to interrupt the memorization process.(the list cannot be created if

interrupted)

Channel List



5-2 RF5-2

9-1 KQED-HD

9-2 KOED-SD

8 CCT

Input Source

 TV(CABLE/AIR)

VIDEO1 (SIDE)

VIDEO2 (REAR)

VIDEO3 (S-VIDEO)

VIDEO4 (YPbPr1)

VIDEO5 (YPbPr2)

VIDEO6 (HDMI1)

VIDEO7 (HDMI2)

COMPUTER(VGA)

TV Select Exit

Channel Scan

Tuner Mode Cable

Channel Skip

Favorite List

Time Zone Eastern Time