User Guide

Supplying Power
Install Batteries
~
~
~
4 "AAA" alkaline batteries
1. (a) Lift the tab of the belt clip while
(b) pushing the clip up to remove it.
(c) Pull lock tab down and lift door up (towards you) to remove
battery cover.
2. Insert four "AAA" batteries. Position batteries according to
polarity markings. Reverse the steps in "1" to re-assemble.
Note: .Make sure the battery + and -terminals are aligned as
shown above.
.When batteries are low or need charging the BATTERY
LOW W will blink. Replace all batteries with new
alkaline batteries.