- Universal Electronics Millennium 4 Universal Remote Control User's Guide

SEARCHING FOR YOUR CODE
If your TV,VCR, Cable Converter or Audio Component
does not respond to the Millennium 4 after trying all of
the codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 4, press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9 - 9 - 1. The LED will blink twice.
4. Aim the remote control at the the TV and slow-
ly alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE: In the search mode, the Millennium 4 will
send IR codes from its library to the selected compo-
nent, starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other compo-
nents,repeat steps 1 through 5, but substitute
the appropriate key (i.e., VCR, CBL,or AUDIO)
for the (VCR, Cable, or Audio) component you
are searching for.