Owner`s manual

5 DC POWER SUPPLY USE

6 POWER ON/OFF

This appliance may be operated with the external power supply (DC adaptor), without a battery

installed.

5-1. Power Supply Use of PC USB PORT

•

Connect the earphone/USB jack to a USB port of a PC with USB cable.

• When the USB communication is established, the LCD panel displays .

• If the PLAY/PAUSE button is pressed for more than 3 seconds, it enters the operation mode and in the

standby (stop) state, and it is enabled to “play and record”.

•

If it is in the PC UCB power supply operation mode, the ﬁ le upload/download feature is not operational.

• Disconnect and then connect again, then it enters the USB communication mode, and the ﬁ le upload/

download feature is operational.

5-2. Use of USB DC Power Supply ADAPTER(5V)

• Connect the earphone/USB jack with USB DC Power Supply ADAPTER port.

After a while, the LCD panel turns into .

• If the PLAY/PAUSE button is pressed for more than 3 seconds, it enters the operation mode and

in the standby (stop) state, and it is enabled to “play and record”.

Caution

• When to disconnect the product from the PC, it is recommended to execute safe hardware removal utility

for the data protection of the product.

6-1. Power On

• Press the PLAY/PAUSE button long enough (for more than 3 seconds), then the power is on.

• Press the REC/PAUSE button long enough (for more than 3 seconds), then the power is on and the

recording is started.

6-2. Power Off

• When in the STOP state for more than 3 minutes, the power is automatically off.

• When in the standby mode, press the REC/PAUSE button long enough (for more than 3 seconds),

then the power is off.