User Manual

ManualsBrandsMemmert ManualsEquipmentUniversal ovens U plus, Incubators I plus, Sterilisers S plus

D24026 | Date 10/2014 45

Menu functions

7.3.7

Balance

For appliances of the size 55 and above, application-specific correction of the

heat output dis-

tribution (balance) between the upper and lower heating groups is possible. The adjustment

range is from –50 % to +50 %.

upper heat output

lower heat output

-20%

lower heat output

+30%

SETUP

Balance

-20 %

2/2

SETUP

Balance

+30 %

2/2

Abb. 25

Heat output distribution (example): The –20 % (left) setting causes the lower heating

groups to emit 20 % less heat than the upper ones. The +30 % (right) setting causes the lower

Heat output distribution (example): The –20 % (left) setting causes the lower heating

groups to emit 20 % less heat than the upper ones. The +30 % (right) setting causes the lower

Heat output distribution (example): The –20 % (left) setting causes the lower heating

heating groups to emit 30 % more heat than the upper ones. The 0 % setting restores the

groups to emit 20 % less heat than the upper ones. The +30 % (right) setting causes the lower

heating groups to emit 30 % more heat than the upper ones. The 0 % setting restores the

groups to emit 20 % less heat than the upper ones. The +30 % (right) setting causes the lower

default heat output distribution.

heating groups to emit 30 % more heat than the upper ones. The 0 % setting restores the

default heat output distribution.

heating groups to emit 30 % more heat than the upper ones. The 0 % setting restores the

7.3.8

Remote control

In the setup entry

Remote control

, you can set whether the

appliance should be controlled via remote control and if

so, in which mode. These settings are available:

►

Off

►

Read Only

►

Write

►

Write+Alarm

When the appliance is in remote control mode, the

symbol appears in the temperature display. In the

settings

Write

and

Write+Alarm

, the appliance cannot

be controlled at the ControlCOCKPIT until the remote

control has been switched off (setting Off) or set to

Read

Only

In order to use the remote control function, program-

ming skills and special libraries are required.

Setup

Balance

Remote Control Off

Gateway 192.168.5 .1

+30 %

2/2

23.2°C

TEMP

Set 180

.0°C