Owner manual

D24022 | Date 10/2014 35
Menu functions
All other settings can be made accordingly. The settings possible are described in the follow-
ing sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance automati-
cally returns to the main menu and restores the former values.
7.3
Setup
In the
SETUP
display, you can set the following parameters:
►
the
IP address
and
Subnet mask
of the appliance's Ethernet interface (for connection to
Subnet mask of the appliance's Ethernet interface (for connection to Subnet mask
a
network)
►
the
Unit
of the temperature display (°C or °F, see page 36)
►
the type of temperature monitoring (TWW or TWB,
Alarm Temp,
only if equipped with
a second temperature sensor, option A6) and the trigger temperature of the monitoring
function (
Max alarm
, see page 37)
►
how the digital backwards counter with target time setting works (
Timer mode
, see page
38)
►
the type of the slide-in unit (Grid or Shelf, see page 38)
►
Remote control (see page 38)
►
Gateway (see page 39)
If the SETUP menu contains more entries than can be
displayed, this is indicated by the display “1/2”. This
means that there is a second „page“ of entries.
To display the hidden entries, use the turn control
to scroll beyond the lowest entry. The page display
changes to “2/2”.
7.3.1
IP address and subnet mask
If you want to operate one ore more appliances in a
network, each appliance must have its
own unique IP address for identification. By default, each appliance is delivered with the IP
address 192.168.100.100.
LAN 1: 192.168.1.233
192.168.1.216
LAN 2: 192.168.1.215
LAN 3: 192.168.1.241
192.168.1.216
Editor
Programmname
Simulation Protokoll
-
+
-
+
Test 01
180 .0°C
i
HPP 250 Labor
i
37 .0°C
44 .4%rh
STAND BY
Programm negnulletsniEllokotorPtäreG efliHnekcurD
AtmoCONTROL
Fig. 21
Operation of several appliances in a
network (schematic example)
Setup
Unit
IP adress 255.145.136.225
Subnet mask 255.255.0.0
Alarm Temp
°C F
Timer mode
TWW TWB
1/2