SUPPLEMENT TO THE OPERATING INSTRUCTIONS for models UFP 600 TS/800 TS
Manufacturer and customer service MEMMERT GmbH + Co. KG PO Box 17 20 91107 Schwabach, Germany Äußere Rittersbacherstr. 38 91126 Schwabach Germany Phone: +49 (0) 09122 / 925-0 Fax: +49 (0) 09122 / 14585 E-mail: sales@memmert.com Internet: www.memmert.com Customer service: Phone: +49 (0) 09122/925-128 and: +49 (0) 09122/925-126 E-mail: service@memmert.com For service enquiries, please always specify the appliance number on the nameplate (see page 14). © 2013 Memmert GmbH + Co.
Supplement to Operating Instructions UFP 600 TS/800 TS About this manual This supplement refers to heating oven models UFP 600 TS and 800 TS featuring an automatic locking mechanism with confirmation button to prevent simultaneous opening of the doors. Explanation of terms Term Meaning Grey side The side from which the heating oven is loaded. Cleanroom side On this side of the chamber, the confirmation button is situated.
Supplement to Operating Instructions UFP 600 TS/800 TS 1. Programme sequence Step Description Door, Grey side Door, cleanroom side Button/ ring light 1 Load appliance on the Grey side. unlocked locked off 2 Close the doors. unlocked locked off 3 Start temperature control programme from MemoryCard. locked (> 50 °C) locked off 4 Observe heating up phase (Example: 2h @ 160°C). locked locked off 5 Unloading temperature reached? (temp.
Supplement to Operating Instructions UFP 600 TS/800 TS 4. Temperature control programme suggestion on MemoryCard Ramp. no. Time temperature Fan Flap 1 0:01 160 °C 100 % CLOSE SPWT(T) Quickly heating up to set temperature. Wait until the setpoint temperature has been reached. 2 2:00 160 °C 100 % CLOSE NEXT Hold time 3 0:01 45 °C 100 % OPEN SPWT(T) Cooling down to unloading temperature. If necessary, open the air flap for faster cooling down.
Memmert GmbH + Co KG | PO Box 1720 | D-91107 Schwabach, Germany | Phone +49 (0) 9122-925-0 | Fax +49 (0) 9122-145-85 | E-Mail: service@memmert.com | www.memmert.com 03.09.
