Operating instructions

4 UP/BP/ULP/SLP 400 - 800
The text of these Operating Instructions has been translated from the German. If
any part of the text is doubtful or the interpretation is unclear, and also in case of
errors, the German original is to be considered as valid.
1 Congratulations on your choice of a MEMMERT Oven!
Manufactured in Germany using the latest production techniques and finest materials
available, you now possess a technically superior and fully developed product. Your oven
has already been subject to extensive testing in our factory.
For correct operation of the equipment it is essential to observe the operating and
maintenance instructions below. This will ensure that your equipment will give many
years´ satisfactory service.
Explanation of symbols:
These symbols mark important information in the operating instructions
The corresponding markings on the unit mean:
Note the Operating Instructions!
Warning, outside of case may be hot!
General safety instructions:
Full consideration must be given to physical and chemical
properties of your load (e.g. combustion temp. etc.) to avoid serious
damage to load, oven, surroundings.
Please note that the MEMMERT ovens described here are not
explosionproof (they do not conform to Occupational Association
Regulation VBG 24). They are therefore unsuitable for drying,
evaporating or burning-in of paints, enamels or similar substances
whose solvents may form an inflammable mixture together with air.
There must be no possibility for inflammable or explosive gas/air
mixtures to form either inside the cabinet or in the immediate
neighbourhood of the equipment.
Excessive dust or corrosive fumes in the interior and/or around the
oven may result in deposits within the oven and cause short- circuits
or damage to the electronic parts. Therefore dust and corrosive
fumes should be kept away from the unit.
Transport:
Always use gloves !
To carry the unit requires at least 2 persons ( Models 400,500) and 4
persons ( Models 600,700)
WARNING!
Take special care when oven is working at high temperatures!
The outer case may be hot!