Operating instructions

32 UP/BP/ULP/SLP 400 - 800
11 The MEMMERT software „Celsius 2000“
Using the „Celsius 2000“ program:
 the P-controller can be programmed from the PC and the programme run can be
started,
 the Memory Card XL can be programmed and the programme run can be started,
 a temperature programme on the Memory Card XL can be overwritten by a new
programme sequence,
 programmes and actual temperature profiles on a Memory Card XL can be loaded,
shown on the screen, and stored on another storage medium (hard disk, diskette),
 several ovens can be controlled through one or several interfaces and the current
actual data can be documented,
 temperature programmes can be created as graphic or table on the PC, changed and
stored.
 Temperature recorder function without set-temperature control function.
Details on installation and operation of the MEMMERT software
„Celsius 2000“
are given in the enclosed user manual.
A soon as a temperature programme has been started with „Celsius 2000“ it is no longer
possible to change the set parameters on the P-controller.
The current status can be shown on the controller display by pressing the set button.


If there is no further action for a few seconds the controller display shows again the current
actual temperature.