Operating instructions

22 UP/BP/ULP/SLP 400 - 800

9.2 The working controller module with main switch in position 

After switching on, the display shows for a few seconds the

program version of the controller.

prog

edit

The unit operates in programme mode if the main switch is set to position .

In this operating mode the programme can be started and stopped, and in the submenu

EDIT the programme can be changed. The setting will affect the unit operation after the

programme is started. The flashing LED prog indicates that the programme is running.

Menu with main switch in position 



= turn rotary knob clockwise

= turn rotary knob anticlockwise