Operating instructions

UP/BP/ULP/SLP 400 – 800 15
Printer mode
The menu item PRINT activates the data transmission to the printer.
Numerical
print
numerical printout with GLP

header data
COMPANY............: PAGE 1/_
EXPERIMENT.......:
PROBE-ID.............: DATE..............: 25-03-96
UNIT-ID.................: SIGNATURE...:
TIME DATE
SETPOINT
TEMP
ACTUAL
TEMP FAN FLAP
10:00 25-03-96 22°C 22°C 20% -
10:01 25-03-96 23°C 22°C 20% -
10:02 25-03-96 24°C 23°C 20% -
10:03 25-03-96 25°C 23°C 20% -
Graphic
print
graphic printout with GLP

header data
COMPANY............: PAGE 1/_
EXPERIMENT.......:
PROBE-ID.............: DATE..............: 25-03-96
UNIT-ID.................: SIGNATURE...:
setpoints
actual values
Print
deactivated
No data is sent to the printer.
Note !
In programme operation (main switch position ) the print-out ends with
the command END. (see under segment end commands ).
On programme start the documentation starts automatically if the GRAPH
or NUM function is activated.

GLP: Good Laboratory Practice