Operating Instuctions Shaking device SV 14 / 22 SV 29 / 45 page 1
General notes, safety notes, notes on electrical equipment and electromagnetic compatibility, as well as notes on maintenance of the unit are to be found in the Operating Instructions for the waterbath. Brief technical description The shaking device permits controlled shaking of beakers or test tubes in a waterbath. The shaking device performs a reversing linear movement with a frequency of approx. 35 to 160 strokes per minute.
Starting up Mains supply The mains cable must be arranged so that it can not come anywhere into contact with hot surfaces of the unit. Filling the waterbath In order to protect the stainless steel shaking device it is necessary to use deionised water as the thermofluid. The bath must be filled so that the liquid level is between the two level marks on the right inside the tank (with the shaking device carrying its load)! Max. level Min.
EC Declaration of Conformity Manufacturer´s name and address: MEMMERT GmbH + Co. KG Äußere Rittersbacher Straße 38 D-91126 Schwabach Shaking device M00 / M01 SV 14-22 / SV 29-45 AC 230 V 50/60 Hz alternative AC 115 V 50/60 Hz Product: Type: Sizes: Nominal voltage: The designated product is in conformity with the European EMC-Directive 2004/108/EEC including amendments Council Directive of 03 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Notes: page 5
Notes: page 6
Notes: page 7
31.07.
