Manual
D24034 | Date 10/2014 25
Operation and control
3.
Save the set value by pressing the confir-
mation key.
The display returns to normal and the
appliance begins adjusting to the defined
set value.
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110
PLUS
ON
344.4
444 4.
TEMP
Set
°C
°C
FLAP
40%
TIMER
hd
1002
End Sept.29 22 24
FAN
%0
%
100
ALARM
max
444.4°C
auto
+
/
-
0.0K
min
444.4°C
O
O
ON
N
N
N
O
O
N
O
Manu
44.Sept
°C22.4
TEMP
°CSet 37.0
Additional parameters can be set accordingly.
If no new values are entered or confirmed for approx. 30 seconds, the appliance automati-
cally restores the former values.
If you want to cancel the setting procedure, press the
activation key on the left or right of the display that you
want to exit. The appliance restores the former values.
Only the settings that you have confirmed by pressing the
confirmation key before cancelling the setting procedure
are accepted.
5.4.3
Adjustment options
As described in chapter 5.4.2 , you can set the following parameters after pressing the cor-
responding activation key (in any sequence):
Temperature
Temperature
Adjustment range: model-dependent (see nameplate and technical
data on page 13)
Heating operation is indicated by the
symbol.
symbol.
Cooling is indicated by the
symbol.
You can select °C or °F as the temperature unit displayed (see
page 34).
°C22.4
TEMP
°CSet 37.0
The minimum temperature that can be reached depends on the surrounding conditions.
The appliances reach up to to 25 °C below room temperature. In order to do so, the
Peltier module needs sufficient ventilation (see Fig. 7 on page 18).
Interior lighting (only for cooled incubators IPP with light module)
Interior lighting (only for cooled incubators IPP with light module)
Adjustment range: 0 % (off), 100 % (on)
LIGHT
%
100
5.4.4
Operation with
digital backwards counter with target time setting,
adjustable from 1 minute to 99 days (
Timer)
In timer operation, you can adjust the time the appliance runs at the set temperature.
1.
Press the activation key to the left of
the timer display. The timer display is
activated.
30.0
%rh
50.0
%CO2
Programm 12
Fr 20.10.2010 20:31
min
000°C
max
000°C
.5°C100
ICH 500
MENU
30.0
%rh
50.0
%CO2
Programm 12
Fr 20.10.2010 20:31
min
000°C
max
000°C
MENU
Set 180.0
TIMER
-
Ende
9:00 23.11.
--h- m
30.0
%rh
50.0
%CO2
Programm 12
Fr 20.10.2010 20:31
min
000°C
max
000°C
.5°C100
ICH 500
MENU
30.0
%rh
50.0
%CO2
Programm 12
Fr 20.10.2010 20:31
min
000°C
max
000°C
MENU
TIMER
-
22.4°C
TEMP
37.0°CSet