Manual

12
D24034 | Date 10/2014
Construction and description
2.5.2
Ethernet interface
The Ethernet interface is intended for appliances which meet the requirements of
IEC 60950-1.
Via Ethernet interface, the appliance can be
connected to a
network to read out protocol
logs with
the AtmoCONTROL software. The
Ethernet interface is located on the rear of
the appliance (Fig. 3).
For identification purposes, each appliance con-
nected must have its own unique IP address.
Setting the IP address is described on page
32 .
With an optional USB to Ethernet converter,
the appliance can be directly connected to a
computer / laptop (see Optional accessories on
page 15).
2.6 Designation (nameplate)
The nameplate (Fig. 4) provides information about the appliance model
, manufacturer and
technical data. It is attached to the front of the appliance, on the right behind the door (see
page 10).
Typ: IPP 260 F.-Nr.: 0109.0088
230 V
~
2.3 A 50/60 Hz 525 W
DIN12880-Kl.3.1 Nenntemp.: 70 °C
1
2
3
4
5
6
10
8
9
7
Fig. 4
Nameplate (example)
1
Type designation
2
Operating voltage
Type designation
Operating voltage
Type designation
3
Applicable standard
Operating voltage
Applicable standard
Operating voltage
4
Protection type
5
CE conformity
Protection type
CE conformity
Protection type
6
Address of manufacturer
7
Disposal note
8
Nominal temperature:
Disposal note
Nominal temperature:
Disposal note
9
Connection / power ratings
Nominal temperature:
Connection / power ratings
Nominal temperature:
10
Appliance number
Connection / power ratings
Appliance number
Connection / power ratings
Fig. 3
Ethernet interface