User Manual

Delivery, Transport and Setting Up

3.3.4 Storage after delivery

If the incubator is initially to be stored after delivery: Read the storage conditions from page

65 .

3.4 Setup

The incubator can be placed either on the ground or on a table (work surface). When doing

this, ensure that the appliance is positioned exactly horizontally. The installation site must be

level and able to reliably carry the weight of the incubator (see page 18 ). Do not place the ap-

pliance on an inflammable surface.

A power connection must be available at the installation site in accordance with the connec-

tion data on the nameplate (see page 18 ).

The distance between the wall and the rear of the chamber must be at least 15 cm. The clear-

ance from the ceiling must not be less than 20 cm and the side clearance from the wall not

less than 8 cm ( Fig. 7 ). Sufficient air circulation in the vicinity of the chamber must be guaran-

teed at all times.

FP



FP



FP



FP



Fig. 7 Minimum clearance from walls and ceiling