User guide

D30374 | Date 10/2014 37
Menu mode
All other settings can be made accordingly. The settings possible are described in the follow-
ing sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance
automatically restores the former values.
7.3
Setup
7.3.1
Overview
In the
SETUP
display, you can set the following parameters:
►
the
IP address
and
Subnet mask
of the appliance's Ethernet interface (for connection to
Subnet mask of the appliance's Ethernet interface (for connection to Subnet mask
a
network)
►
the
Unit
of the temperature display (°C or °F, see page 38)
►
how the digital backwards counter with target time setting works (
Timer mode
, see page
39)
►
the type of drawer (grid or shelf, see page 39)
►
the automatic defrosting system (
Defrost
, see page 39)
►
Remote control (see page 40)
►
Gateway (see page 40)
If the setup menu contains more entries
than can
be displayed, this is indicated by the designation
"1/2". This means that there is a second "page" of
entries.
To access the entries not displayed, use the turn control to
scroll beyond the lowest entry. The page display jumps to
"2/2".
7.3.2
IP address
If you want to operate one ore more appliances in a
network, each appliance must have its
own unique IP address for identification. By default, each appliance is delivered with the IP
address 192.168.100.100.
LAN 1: 192.168.1.233
192.168.1.216
LAN 2: 192.168.1.215
LAN 3: 192.168.1.241
192.168.1.216
Editor
Programmname
Simulation Protokoll
-
+
-
+
INP 250 Test 01
180 .0°C
i
HPP 250 Labor
i
37 .0°C
44 .4%rh
151
5
STAND BY
Programm negnulletsniEllokotorPtäreG efliHnekcurD
AtmoCONTROL
Fig. 20
Operation of several appliances in a
network (schematic example)
Setup
Unit
IP adress 255.145.136.
225
Subnet mask 255.255.0.0
Alarm Temp
°C F
Timer mode
TWW TWB
1/2