User guide

18
D30374 | Date 10/2014
Delivery, transport and setting up
3.6.2
Tilt protection
Attach the appliance to a
wall with the tilt protection.
The tilt protection is included
in the delivery.
1.
Screw the tilt protection
to the rear of the appli-
ance as illustrated.
2.
Bend the tilt protec-
tion upwards by 90° in
the desired distance to
the wall (consider the
minimum distance to the
wall, see page Fig. 8).
3.
Drill a hole, insert a plug
and screw the tilt protec-
tion to a suitable wall.
≥ 5 cm ≥ 5 cm
≥ 20 cm