User guide

D30374 | Date 10/2014 11
Construction and description
Ethernet interface
Via Ethernet interface, the appliance can be
connected
to a
network, so that you can transfer pro-
grammes created with
AtmoCONTROL software
to the appliance and read out protocols. The
Ethernet interface is located on the rear of the
appliance (Fig. 4).
For identification purposes, each appliance con-
nected must have its own unique IP address.
Setting the IP address is described on page
37 .
You will find a description of how to transfer programmes via Ethernet in the en-
closed
AtmoCONTROL manual.
With an optional USB to Ethernet converter, the appliance can be directly connected to a com-
puter / laptop (see Optional accessories on page 14).
2.6 Designation (nameplate)
The nameplate (Fig. 5) provides information about the appliance model
, manufacturer and
technical data. It is attached to the front of the appliance, on the right behind the door (see
page 9).
Typ: ICP 260 F.-Nr.: F613.0088
230 V
~
5.2 A 50/60 Hz 1200 W
DIN12880-Kl.3.3 Nenntemp.: -12 - +60 °C
1
2
3
4
5
6
10
8
9
7
Fig. 5
Nameplate (example)
1
Type designation
2
Operating voltage
Type designation
Operating voltage
Type designation
3
Applicable standard
Operating voltage
Applicable standard
Operating voltage
4
Protection type
5
CE conformity
Protection type
CE conformity
Protection type
6
Address of manufacturer
7
Disposal note
8
Temperature range
9
Connection / power ratings
Temperature range
Connection / power ratings
Temperature range
10
Appliance number
Connection / power ratings
Appliance number
Connection / power ratings
Fig. 4
Ethernet interface