Instruction Manual

30
D30393 | Date 10/2014
Operation and control
When the timer has elapsed, the display shows 00h:00m. All
functions (heating etc.) are switched off. In addition, an acoustic
alarm sounds, which can be turned off by pressing the confirma-
tion key.
To deactivate the timer, open the timer display by pressing the
activation key again and then turning the turn control
to reduce
the timer setting until --:-- is displayed. Confirm with the confirma-
tion key.
5.4.6
Programme mode
In this operating mode, programmes saved in the appliance can be started with different
combinations of individual parameters (temperature, humidity, CO
2
) at staggered intervals,
which the appliance then automatically processes in sequence. These programmes are not cre-
ated directly at the appliance but externally at a computer / laptop and using
AtmoCONTROL
software. Transfer to the appliance is possible using the provided USB storage medium or via
Ethernet.
A description of how to create and save programmes can be found in the separate
AtmoCONTROL software manual.
Starting a programme
Starting a programme
1.
Press the activation key to the right of
the status display. The current operating
mode is highlighted automatically, in this
example
manual mode
(
).
UNP 500
344.4
444 4.
TEMP
Set
°C
°C
LIGHT
100
%
manueller Betrieb
FLAP
40%
.
4
44
4
4
.
TEMP
Se
t
°
C
°C
FLAP
%
L
I
G
H
T
%
TIMER
End
---- mh
- -- -- - ---
Fr 20.10.2010 20:31
ALARM
min
100°C
max
400°C
auto off
+
/
-
0.0K
0 8 16
40
80
GRAPH
0
8
16
4
0
8
0
GRAPH
APH
Manual mode
17:4413.Sept.2012
Activate
2.
Turn the turn control until the

start
symbol is highlighted. The current
programme is displayed, in this example
Test 012
.
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110
PLUS
ON
344.4
444 4.
TEMP
Set
°C
°C
FLAP
40%
TIMER
hd
1002
End Sept.29 22 24
FAN
%0
%
100
ALARM
max
444.4°C
auto
+
/
-
0.0K
min
444.4°C
O
O
ON
N
N
N
O
O
N
O
Manu
44.Sept
Test 012
ready
10:4412.Sept.2012
Only the programme currently selected in the menu and shown in the display can be
used. If you want to process another programme, you need to activate it in the menu
first (description from page 56).
3.
To start the programme, press the confir-
mation key. The programme starts. The
display shows:
►
the programme description (in this exam-
ple
Test 012
ple Test 012ple
)
►
the programme segment description, in
this example
Ramp 1
►
the current run (in case of loops)
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110
PLUS
ON
344.4
444 4.
TEMP
Set
°C
°C
FLAP
40%
TIMER
hd
1002
End Sept.29 22 24
FAN
%0
%
100
ALARM
max
444.4°C
auto
+
/
-
0.0K
min
444.4°C
O
O
ON
N
N
N
O
O
N
O
Manu
44.Sept
Test 012
Ramp 1
10:4412.Sept.2012
TIMER
00m00h
End
13:30 23.11.
TIMER
--m--h
End
9:00 23.11.