Manual
52
Advanced Functions
7.2
Basic appliance settings (
Setup)
(setup options may vary depending on the appliance model)
In this operating mode, the basic settings for the
appliance can be made.
By turning the push-turn control and holding
down the SET key, the following parameters can be selected
and changed, as described in chapter Basic operation on page 27:
Clock time in 24 hr. format
Conversion to summer time is not automatic,
but must be done manually.
Date
The controller features a calendar that automatically
observes the different lengths of months and leap years.
Weekday
Weekday
Tu
Year
Adjustment range from
2000
to
2100
Acoustic signal at programme end
Acoustic signal at programme end
ENDSOUND
Setting:
OFF
or
ON
or ONor
Acoustic Signal for
Acoustic Signal for
alarm, e.g. over/undertemperature
alarm, e.g. over/undertemperature
ALARM so
Setting:
OFF
or
ON
or ONor
Communication address
Adjustment range:
0
to
15
(see chapter "
Communication interfaces
“ on page
57
)
Automatic defrosting system
Automatic defrosting system
Setting:
off 3h 6h 12h 24h 48h
(see page
58
).
Factory setting:
12h
PRINT SETUP