Manual

28
Operation and Control
5.7
Basic operation
The desired parameters are entered on the operating panel of the controller on the front of
the appliance (
Fig. 15
). Basic settings, as well as those for time and pressure, can also be made
here. In addition, programmed and current parameters are displayed, as well as warning mes-
sages:
4
3
2
1
STERI DEFRO
2
IN 1
IN 2
OUT
IN 1
IN 2
OUT
PRINT
SETUP
loop
t3
t4
t2
t1
on
off
Mo
Tu
We
Th
Fr
Sa Su
°C
°C
MIN
AUTO
MAX
h
set
off
on
push
card
rh
mb
%
CO
mb
2
IN 1
IN 2
OUT
OUT
1
2 3 4 5 6 7 8 9
10111213141516
Fig. 15
Operating panel
1
Time display
2
Operating mode display (see page
Time display
Operating mode display (see page
Time display
29
Operating mode display (see page 29Operating mode display (see page
)
29 )29
3
Display appliance is heating up
Operating mode display (see page
Display appliance is heating up
Operating mode display (see page
4
Temperature display
Display appliance is heating up
Temperature display
Display appliance is heating up
5
Display: appliance is cooling down
Temperature display
Display: appliance is cooling down
Temperature display
6
Alarm display (see chapter
Display: appliance is cooling down
Alarm display (see chapter
Display: appliance is cooling down
7.3
)
7.3 )7.3
7
Temperature monitoring display (see
Alarm display (see chapter
Temperature monitoring display (see
Alarm display (see chapter
chapter
Temperature monitoring display (see
chapter
Temperature monitoring display (see
7.3
)
7.3 )7.3
8
Humidity display
chapter
Humidity display
chapter
9
Setting the CO
Humidity display
Setting the CO
Humidity display
2
setpoint (only for models
Humidity display
setpoint (only for models
Humidity display
with CO
Setting the CO
with CO
Setting the CO
2
supply)
Setting the CO
supply)
Setting the CO
2
supply)
2
setpoint (only for models
supply)
setpoint (only for models
10
Display: appliance is humidifying
11
Display: water tank empty
Display: appliance is humidifying
Display: water tank empty
Display: appliance is humidifying
12
Display: fan speed
Display: water tank empty
Display: fan speed
Display: water tank empty
13
Card reader
Display: fan speed
Card reader
Display: fan speed
14
Push/turn control
15
Set key
16
Text display and (for appliances with inte-
Set key
Text display and (for appliances with inte-
Set key
rior lighting) Display: interior lighting
Text display and (for appliances with inte-
rior lighting) Display: interior lighting
Text display and (for appliances with inte-
All operating functions are selected by turning the push-turn control to the
left or right...
...and adjusted by turning with the SET key held down.
set
set