Instruction Manual

29
CELSIUS 10 FDA-Edition
6.2
Connect ovens with an
RS-232 interface
To connect an oven with an RS-232 interface, a
twisted RS-232 connection cable in accordance
with DIN 12900 part 1 is required (see also page
48
). If the computer has no nine-pin
RS-232
interface, then a
USB–RS-232 adapter is addition-
ally required (available in specialist shops, see
figure on the right).
Connect the RS-232 connection of the oven to the
RS-232 or USB connection of the computer and log
on the oven in CELSIUS as described on page
25
.
6.3
Connect ovens
with an Ethernet interface to
a network (
LAN)
For identification purposes, each oven that is to be connected to a
network (
LAN) should have
its own unique
IP
or DNS address (e.g. firmxyz.dyndns.org). Schematic example:
IP or DNS address (e.g. firmxyz.dyndns.org). Schematic example:IP
Each oven is delivered by default with the
IP
address 192.168.100.100. The programme
"XTADMIN", which can be found on the CELSIUS CD-ROM, can be used to change the
IP
ad-
IP ad-IP
dress of the oven.