User Manual

D30396 | Date 09/2014 29
AtmoCONTROL FDA Version
5.4.4
Programme example
loop
27 3 5
6 8
9
41
Unload
250 °C
20 °C
0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0% 80% 0%
1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h 1 h
2
3
5
6
8
1 4
Fig. 11
First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80
Fig. 11
First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80
Fig. 11
% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the
First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80
% power (3) and the temperature is lowered for one hour (4) to 20.0 °C (5). Subsequently, the
First, the appliance heats up to 250.0 °C (2) for one hour (1). Then, the fan begins to run at 80
fan is switched off (6). This sequence is repeated from the jump target (7) ten times (8).