User guide

C6010 Specifications
5 December 2012 – v1.0
Page 92 of 100
 Error/operational status messages
This section lists all the status messages that you can encounter when using your C6010
printer.
Status messages can be conveyed both through the LCD screen on the Control Panel of your
C6010 printer and through Alert windows on your Mac screen. In some situations both
avenues are used together. See Common printer messages and alerts on page 58 for some
examples.
 Status messages on your printer's LCD screen
As mentioned elsewhere, the Power lamp is:
 ON and steady when the printer is ready to operate.
 BLINKING when the printer is busy.
 OFF only when the printer is off.
Information conveyed by status messages shown on your printer’s LCD screen is covered in
the following table, and classified into one of three types of message:
 User Intervention required – operational status reached requiring your intervention.
 Warning – recoverable error state requiring your intervention.
 Fatal error – if you encounter these errors, contact support personnel.
Message Type
Message on the LCD screen
User Intervention Required
(User action required to resume printing)
Paper jam
Paper out
Ink low
Out of Ink/Invalid or missing ink supply
Input Manual Feed
Duplex print
Warning
(User intervention can recover from these errors)
Jam recovery door open
Tilt error
Latch open
Invalid or missing print head
Incompatible print head
Fatal Error
Printer error, contact service.
Invalid firmware
Sump full warning
 Alert windows status messages
Messages listed in the following table are displayed by the C6010 printer driver on your Mac
screen as a small popup window, called an Alert window.