User guide

C6010 Supplies and accessories
5 December 2012 – v1.0
Page 82 of 100
 Ink
You must use only C6010-compatible ink in your C6010 printer. C6010 ink cartridges carry
information about the ink they hold. This information is used by the printer to optimise
printing on various paper types.
 Sourcing new ink
Contact your supplier to source new ink tanks.
 Ink storage and handling
C6010 inks do not require special storage and handling. Common recommendations are listed
below, but your particular location may require further considerations.
 Do not expose ink to freezing 0 ºC (32 ºF) temperatures.
 Do not expose ink to temperatures higher than 60 ºC (140 ºF).
 Do not drop ink tanks.
 Allow ink to acclimatise to ambient temperature before using in your printer.
 Replacing ink tanks
New ink tanks may be supplied in a blister pack as shown in the Ink tanks section on page 14
or in individual ink tank packaging.
You do not need to switch off your printer to replace ink cartridges.
To replace the ink tanks in your printer:
1. Ensure all Print commands have terminated and the printer is idle.
2. Lift the ink tank access cover and the four ink tank covers to reveal the ink tanks in their
slots (see the printer Internal view on page 12).
3. Carefully remove the ink tanks from their slots.
DO NOT switch off your printer if any of your ink tanks have been removed. Doing so may
compromise ink delivery in your printer.
4. Follow the instructions in Installing the ink tanks on page 18 from step 2.
Always consider the environment when disposing of ink tanks. Follow your supplier instructions
to ensure you are conforming to local regulations.
 Printhead cartridge
Your C6010 printhead cartridge is a delicate micro-electrical-mechanical device and should
be treated with due care to avoid degradation of print quality.
 Sourcing new printhead cartridges
Contact your supplier to source new printhead cartridges.