User guide

C6010 Managing your C6010 printer
5 December 2012 – v1.0
Page 79 of 100
 Resetting original configuration settings
 Factory default printer settings
If, for any reason, you need to reset the printer settings back to their factory defaults, press the
Menu button on your printer’s Control Panel, use the Up or Down button to select Reset
defaults, and then press the OK/Resume button. Press the OK/Resume button again to
confirm.
A number of setup parameters in your printer will change, including:
 Language
 IP Configuration.
 Factory default printer driver settings
If the layout of your printouts do not match your expectations, resetting the printer driver
options back to their original, default settings may solve the problem.
To reset your printer driver to the original, factory default options installed when you first set
up your printer:
1. With a document open, choose File > Print.
2. Click on the Presets arrow.
3. Select Standard from the pop-up menu.
The next time you issue a print command to your C6010 printer the original setting
configured during initial setup will be used.