User guide

C6010 Setting up your C6010 printer
5 December 2012 – v1.0
Page 16 of 100
 Setting up your C6010 printer
Printer installation consists of:
 Removing your printer from its packaging.
 Installing your printer on a desktop (see page 18).
 Powering up your printer (see page 20).
 Installing the ink tanks (see page 18).
 Installing the printhead (see page 24).
 Loading paper in the front paper tray (see page 21).
 Installing the printer driver (see page 28).
The included Quick Start Guide provides a quick reference to the process described here.
Refer to that document for a pictorial overview.
 Unpacking your new printer
Take care when unpacking your new printer and try not to damage the packaging materials.
The packaging materials should be retained in case you ever need to transport your printer to a
remote location. See Remote relocation on page 96.
To unpack your new printer:
1. Ensure the printer box is upright and on a level surface.
2. Open the box and identify the Shipping Checklist (see page 9).
3. Carefully extract all the contents of the box and check the contents against those shown in
the Shipping Checklist. See Unpacking your printer in the Appendices on page 97.
If there is any variation between what has been delivered and what is described in the Shipping
Checklist, contact your supplier before proceeding.
4. Check for any physical damage to the packaging or any of its contents prior to
installation.
DO NOT use any damaged components – bring them to the attention of your supplier.
5. Remove any obvious packing materials in or around the printer and any external transport
stays or tapes on the components.