User Manual

Commissioning the system
Step 1
Before using the air purifier for the first
time, open the filter cover and remove the
composite filter. Make sure to remove any
packaging material from the filter element,
or the product will not function correctly.
Step 2
Plug the output of the power adaptor into the
port on the bottom of the air purifier.
Plug the power adaptor into an electrical
outlet, the power button will illuminate red
and beep.
The air purifier should now be in standby
mode.
Step 3
Push the power button once to turn the air
purifier on.
The air purifier should now be in operating
mode at the low fan speed setting.
Operating Guide
Control Panel
Power Button
When the power adaptor is first connected to
the purifier, the indicator light around the
power button will be red, indicating the air
purifier is in standby mode.
Press the power button once to turn on the air
purifier; the indicator light will now be blue;
the unit will operate in the default mode (low)
fan speed.
Operating Mode
Press the power button repeatedly to cycle
through the different speed settings.
1 – High Speed –Lighter blue indicator light
2 – Low speed – Darker blue indicator light
3 – Sleep mode (Low speed) - Blue indicator
light flashes 2 times then lights off
4 – OFF – Red indicator light
The corresponding fan speed indicator light
will display the current fan speed.
6
7