E X E C U T I V E B R A V I S S I M O I I P R O - S T E A M S TAT I O N complies with INTERNATIONAL IEC60355 SAFETY SPECIFICATIONS 2100W Model: 23810 PLEASE READ ALL INSTRUCTIONS BEFORE USE 2 year guarantee MW_EX_23810_BRAVISSIMO_PRO 2_IM.
Dear Customer, thank you for having decided to purchase an appliance from the Mellerware range. The design, features and technology of this appliance as well as the strict quality controls used during manufacture will provide full satisfaction for many years. The packing materials used for this appliance are part of a pick-up, sorting and recycling system. If you wish to discard them, please use the public containers provided for each kind of material. Description A Iron on/off switch.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 MW_EX_23810_BRAVISSIMO_PRO 2_IM.indd 3 Fig.
Tips and safety warnings -Please read these instructions carefully before using the appliance and keep them for future reference. -Unpack the appliance and check it is in perfect condition and working order, as any factory fault or damage caused by transport is covered by the MELLERWARE guarantee. -This device has been designed for household use, not for commercial use. -Do not leave the appliance without supervision if you are not going to use it immediately.
-Set the desired temperature with the thermostat control (J), depending on the type of cloth to be ironed (Fig. 3). -The appliance will be ready for use when the pressure indicator LED (E) lights up (Fig. 4). While ironing, this LED (E) goes on and off automatically, this is normal. -By pressing the steam switch (H) you will get a constant steam jet (Fig. 5). The steam stops when you release the switch.
Breakdowns Causes Solutions Water drips Iron thermos- Set the thermostat tat control (J) control to the from the holes on the set to the mi- steam zone "···". base of the nimum posiiron when tion "·""··". turning on the steam switch (H). The boiler is too full. Remove some water. The boiler is in a tilted position. Place it on a horizontal surface. The iron does The switch not heat and the LED (K) does not light up. Iron thermostat control (J) set to the minimum position. Faulty power connection.
MW_EX_23810_BRAVISSIMO_PRO 2_IM.
27 Nourse Avenue Epping 2 Cape Town P.O. Box 975 Eppindust 7475 South Africa Tel: +27 21 534 8114 Fax: +27 21 534 8086 Service Centre Share Call: 086 111 5006 w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a MW_EX_23810_BRAVISSIMO_PRO 2_IM.
