adria ver II steam iron 1400W Model: 23300A PLEASE READ ALL INSTRUCTIONS BEFORE USE 23300A_IM.
IRONING TEMPERATURES WARNING! Always check the label on the article to be ironed for correct ironing instructions! • Sort the laundry separating different fabric types – wool with wool and cotton with cotton etc. Start ironing the fabrics requiring the lowest temperatures (synthetics) first and progress to a higher temperatures as the iron heats up quicker than it cools. If the fabric to be ironed has various fiber materials (e.g. cotton with polyester), use the lower/lowest ironing temperature.
KEY and CHARACTERISTICS A B C G E H D F Description A Spray button B Steam blast button C Steam regulator knob / Self-cleaning function D Spray nozzle E Filling hole F Sole plate G Temperature control dial H Pilot light CHARACTERISTIC FUNCTION Temperature Dial Knob Adjust temperature according to fabric to be ironed.(see table below) Power Indicator Light Indicator light will go off when desired temperature is reached.
IRONING INSTRUCTIONS Note: The iron may smoke slightly when switched on for the first time. This is normal and will soon cease. Please read these instructions carefully before use. - Set the temperature control dial to the correct temperature as indicated in the ironing instructions on the label or as per table above. - The correct temperature will be reached when the indication light has switched off.
DRY IRONING • Insert the plug into the wall socket. • Ensure that the dry/steam selector button (C) is in position“0”. • Select the setting on the temperature control dial best suited for the fabric to be ironed. • When the indication light has switched off, ironing may commence. STEAM-IRONING • As indicated on the temperature control dial and the temperature table, steam ironing is only possible at higher ironing temperature. • Ensure that there is enough water in the water tank. • Stand the iron upright.
hot water or steam, take caution when you turn a steam iron upside down: there may be hot water in the tank. • Do not allow the supply cord to come into contact with hot surfaces. Let the iron cool down completely before transporting, moving or storage. Wrap the power supply cord around the iron when storing. • Always disconnect the main plug from wall socket before filing the iron with water or pouring the remaining water out.
TROUBLE SHOOTING Problem Reason Action Pre-caution Iron is leaking water. Temperature is too low Set the temperature to steam setting (cotton) Check fabric type is suitable for high steam temperature Iron is not heating up Steam switch is on self clean Turn steam switch setting to steam or 0 Switch steam setting to 0 (off) after use or function position when filling tank. Tank is overfilled Empty water tank Fill to MAX mark only.
