User manual
Table Of Contents
- ConnectX®-2 EN Dual Port SFP+ Ethernet Adapter Card User Manual
- Table of Contents
- List of Figures
- List of Tables
- Revision History
- About this Manual
- 1 Overview
- 2 Adapter Card Interfaces
- 3 Driver Software and Firmware
- 4 Ethernet Adapter Card Installation
- Appendix A: Specifications
- Appendix B: Interface Connectors Pinout
- Appendix C: Replacing a Tall Bracket With a Short Bracket
- Appendix D: Avertissements de sécurité d’installation (Warnings in French)
- Appendix E: Sicherheitshinweise (Warnings in German)
- Appendix F: Advertencias de seguridad para la instalación (Warnings in Spanish)
ConnectX-2 Ethernet Card User Manual Rev 1.6
Mellanox Technologies
7
Revision History
This document was printed on 2/15/11.
Table 1 - Revision History Table
Date Rev Comments/Changes
Jan. 2011 1.6 Changed Air flow requirement
Added to the Set up section
Dec. 19th,
2010
1.5 Minor formatting changes
Nov. 22nd,
2010
1.4 Added Generation D card Mini Form Factor
Oct. 28th,
2010
1.3 Added Technical Support and Firmware and Software Updates sections to the Pref-
ace section
Added RoCE
Added ConnectX EN PXE
Added Set up section, This is a sanity check after card installation.
Added KCC statement to Appendix A
Added QSFP to SFP+ QSA adapter
Removed Gen 1 cards
Formatted EMC table
Changed EN 60950-1: 2001 to EN 60950-1: 2006
Changed RDMA over Ethernet
Added RDMA over Ethernet
New template
April 2010 1.2 New power numbers
Feb. 2010 1.1 Added Section on PXE boot
Feb. 2010 1.0 Initial Release