Technical data

Chapter 3: Upgrade Instructions for the Solaris OS 19
Checking the
Installation on
the Solaris OS
After you have completed installing the software packages, check that they installed
successfully.
1. At the prompt, type this command, and press Enter.
pkginfo -l <package name>
In this command, <package name> is the name of a package that you
installed.
a. To determine which software packages reside on your system, type this
command at the prompt.
pkginfo | grep SM
Look for the storage management software packages, such as SMagent,
SMclient, SMutil, and SMruntime.
b. To determine whether the RDAC driver package resides on your system,
type this command at the prompt. In this command, <rdac> is the RDAC
package name.
pkginfo | grep <rdac>
Look for the storage management softwareRDAC package.
2. From the /opt/StorageManager directory, review any error messages from
the error message log, and correct the problem. If the problem persists, contact
your Technical Support Representative.
3. For each package you installed, repeat step 1 through step 2.
4. Start the storage management software. At the prompt, type this command, and
press Enter:
SMclient
After the client software starts, the Enterprise Management Window and these
dialogs appear:
— Select Addition Method
— Enterprise Management Window Task Assistant
Refer to the online help topics in storage management software for more
information about how to manage your storage array.