Technical data

Appendix A: Boot Device Installation 153
7. Based on your installation environment, perform one of these actions:
— Cluster environment – Go to step 8.
— Standard environment – Start the software. Go to step 9.
8. Install the host software on each host in the server cluster.
NOTE Do not configure the server cluster software at this time. You are
instructed when to configure the server cluster software after you
complete the storage management software installation.
You cannot mix two architectures in the same server cluster. For
example, a server cluster cannot contain both the 32-bit and 64-bit
versions of the Windows OS.
9. Start the storage management software with the procedure for your operating
system:
— UNIX-based operating systems – At the prompt, type SMclient,
and press Enter.
— Windows operating systems – Select Start >> Programs >>
SANtricity ES Storage Manager SMclient.
After the client software starts, the Enterprise Management Window and these
dialogs appear:
— Select Addition Method
— Enterprise Management Window Task Assistant
Refer to the online help topics in storage management software for more
information about how to manage your storage array.