User`s manual

OverviewRev 1.0

Mellanox Technologies

For example, the part number MHZH29-XTR describes Mellanox Technologies’ ConnectX-2 card

with dual ports one SFP+ and one QSFP, a PCIe2.0 x8 5.0GT/s interface, no on-board memory

(mem-free), a short PCI bracket, and RoHS R5 compliance. Using the legend,

• field M = M to indicate a Mellanox Technologies product,

• field H = H to indicate an InfiniBand Adapter Card,

• field T = Z to indicate QSFP (IB QDR) and SFP+ (10GigE),

• field S = H to indicate the ConnectX family,

• field # = 2 to indicate two ports,

• field I = 9 to indicate PCI Express 2.0 x8 running at 5.0GT/s,

• field X = X to indicate no on-board memory,

• field B = T to indicate a tall bracket, and

• field R = R to indicate RoHS R6 (lead free) compliance

1.3 Finding the GUID/MAC and Serial Number on the Adapter Cards

All Mellanox adapter cards have a label on the printed side of the adapter card that has the card

serial number, the card MAC for Ethernet protocol and the card GUID for InfiniBand protocol.

VPI Cards have both a MAC and a GUID.

IHost Inter-

face

X = PCI-X, 4 = PCIe x4, 8 = PCIe x8, 9 = PCIe (SerDes @ 5.0 GT/s)

G Generation <blank> = Initial product generation

- Separator

XMemory

Size

X = MemFree, 1=128MB, 2=256MB, 3=512MB

B Bracket S = Short, T = Tall, N = None

R RoHS <blank> = non RoHS, C = RoHS R-5 w/ Exemption, R = RoHS R-6 Lead-Free

Table 4 - Mellanox Cards Part Numbering Key

Adapter Card

OPN

MHTS#I-XBR

Field Decoder