User manual

Transport, storage and disposal
89
ENGLISH
Problem Cause Action
Loud grinder noise. Foreign object in the
grinder.
 Contact the hotline.
Brewing unit cannot
be inserted after
removing.
Handle for the
locking mechanism
of the brewing unit
is not in the correct
position.
 Check that the handle for the
locking mechanism is correctly
engaged (see section8.3 one
page81).
Drive is not in the
correct position.
 Press and hold the "Coee
strength" button. Also press the
ON/OFF button. The appliance
initialises. Release buttons again.
System error appears
on the display.
Software problem.  Switch the appliance o and
on again (see section4.1 one
page60).
 Contact the hotline.
10 Transport, storage and disposal
10.1 Venting the appliance
We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.
During venting, residual water is removed from the appliance.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start using the arrow buttons and conrm with "menu/ok".
5. Follow the further instructions on the display.
» The appliance switches o.
10.2 Transporting the appliance
ATTENTION
Freezing residual water can damage the appliance.
 Prevent the appliance from being exposed to temperatures below 0°C.
Information
Transport the appliance in the original packaging. This avoids damage in
transit.