Operation Manual

62
10.6 Adjusting grinding neness
The grinding neness level was optimally adjusted prior to delivery. Consequently,
we recommend that you only readjust grinding neness after dispensing
approximately 1,000 coffees (about 1 year).
You can only set the grinding neness while the mill is running. Thus, adjust
grinding neness directly after coffee dispensing starts.
If the coffee avour is not sufciently intense, then we recommend that you set a
ner grinding level.
• Place the lever (Fig. B, no. 19) in one of the three positions (as viewed
from the rear of the appliance).
Lever position Grinding neness
Left Fine
Centre Medium
Right
Coarse
(factory setting)