Operation Manual

Cleaning the brewing system:

 As soon as the prompt "Drop in cleaning agent"

appears in the display …

 open the flap of the drop-in slot and drop a

cleaning tablet into it.

P Close the flap and confirm with "OK".

The brewing system is now cleaned.

After completing the cleaning program …

P remove the splash guard again,

 close the grounds drawer and

 fold down the cup tray.

P Remove and empty the container with the

remaining cleaning solution.

As soon as product dispensing is shown again in the

display …

– Insert the suction hose again into the container

with fresh milk.

10.e Weekly cleaning

Clean the mixing and spout area at least 1 x per

week or also in between in case of high output or

visible soiling.

P Switch the machine off as described under 7.b

and allow it to cool.

Dismantling parts:

 Pull off the cover from the beverage spout

toward the top and …

 remove the beverage spout toward the front.

 Pull out the funnel unit, remove its lid and then

pull ...

 the two stream controls toward the top.

 Finally, remove the steaming unit and pull the

milk hose toward the back out of the machine.











