Operation Manual

2. Description
This machine is a fully automated coffee maker to
dispense coffee and milk coffee products for a daily
demand of up to 150 products. The following can be
dispensed:
Coffee
Milk foam
Mixed products of the above components
Hot water
Steam
The hourly capacity is for ...
Coffee approx. 150 cups per hour (for twin-
product espresso), depending on the beverage
and the cup size
Hot water approx. 25 liters per hour
This machine is equipped with a fully automated
cleaning program for the coffee and milk module. The
housing is made of stainless steel and high-quality
plastic. The design of the machine enables
compliance with the operator duties from the ...
HACCP Hygiene guidelines
Accident prevention regulations for electrical
safety in commercial applications.
3. Purpose
This machine is intended
For the service operation by trained personnel in
the gastronomy field.
For supervised self-service operation in
self-service shops and breakfast areas.
For stationary setup in dry, enclosed rooms.
alternatively for a fixed water connection or
unpressurised operation through fresh water
and waste water canisters.
This machine is not intended to be used ...
In areas with high relative humidity (e.g. areas
with heavy steam development) or outside.
Onboard of vehicles or in mobile rooms (please
inquire with manufacturer).
4. Technical data
4.a Operating data
Hourly capacity....................: 25 liters Hot water
Permitted ambient
temperature.........................: +5...30° C
Permitted relative humidity ..: < 80%
Noise level ..........................: < 70 dB(A)
4.b Unit data
Dimensions (WxDxH) ..........: 430 x 500 x 590 mm
Weight.................................: 48 kg
Coffee beans reservoir ........: 1x / 2x 650 gr
Grounds drawer capacity.....: For 25-30 portions
4.c Connections
Power supply.......................: 230 V / 50 Hz
Power consumption.............: 2,8 kW max.
Fuse protection in building...: 16 A required
Connection..........................: Power cable 1.5 m
with grounded line
plug
Freshwater connection ........: R 3/4" A - DN 10
external thread
Freshwater pressure ...........: min. 2.0 bar (200 kPa)
(dynamic) at approx.
3 l/min., if above
6 bar (600 kPa) a
pressure reducer is
required
Carbonate hardness
freshwater ...........................: 1° dKH - dkH
> dKH stabilizer
(Everpure water filter)
required!
> dKH
Decarbonation system
(Brita water filter)
required!
< dKH Inquire with
manufacturer!
Waste water connection ......: at least DN 25 - NW 1"
4.d Optional accessories
Cup warmer ........................: bar-cube cw
Refrigerator / Cup warmer ...: bar-cube mc-cw
Refrigerator / Coin Checker.: bar-cube mc MP
Refrigerator / Card Reader ..: bar-cube mc CR
Grounds discharge ..............: Container discharge
GB
5