GB Version 2.3 01/2013 Operating Instructions Melitta Europa GmbH & Co. KG D-32372 Minden Umschlag_Cremio_2.3.indd 1 20.12.
B A 1 2 3 C 4 5 6 7 max. max. min. D 8 9 10 Umschlag_Cremio_2.3.indd 2 11 12 20.12.
Congratulations on buying your Melitta® Cremio milk frother! GB Dear Customer, We would like to welcome you as a milk froth lover and as someone who enjoys a variety of coffee specialties. With your new Melitta® Cremio milk frother, you will experience many special moments of enjoyment.
Information about these operating instructions Warning! Sections with this symbol contain information for your safety and indicate possible accident and injury hazards. Intended use The Melitta® Cremio milk frother is exclusively designed for the preparation of warm and cold milk froth as well as for heating milk.
Non-intended use applies when you use the Melitta® Cremio in a manner that differs from the use described in these operating instructions. GB Non-intended use Warning! Through non-intended use you can injure or scald yourself. Note The manufacturer bears no liability for damage attributed to improper use. Heft_Cremio_2.3.indd 19 19 21.12.
General safety instructions Please read the following instructions carefully. Failure to comply with the instructions can affect your own safety and the safety of the appliance. Warning! – Keep the following objects out of the reach of children: packaging materials and small parts. – All persons using the appliance must be familiar with the operation of the appliance beforehand, and they must be instructed in the possible hazards associated with the appliance.
– Never reach into the interior of the appliance when it is in operation. – The appliance can be used by children above 8 years of age and by people with limited physical, sensory or mental abilities or lacking experience and knowledge if they are supervised or were instructed on the safe use of the appliance and understand the resulting dangers. Children are not allowed to play with the appliance.
Warning! Danger of fire and electric shock due to incorrect supply voltage, incorrect or damaged connections and power cord. – Ensure that the supply voltage agrees with the supply voltage specified on the type plate of the appliance. – Ensure that the power outlet meets the applicable standards for electrical safety. If in doubt contact a qualified electrician. – Never use damaged power cords (damaged insulation, bare wires).
Legend for Fig. A (see cover) No. Explanation 1 Lid 2 Sealing 3 Frothing rod 4 Container 5 Handle 6 Button: to froth warm milk & heat milk 7 Button: to froth cold milk 8 Station with power-supply cord 9 Cord storage 10 Milk frothing attachment (cappuccino) 11 Milk frothing attachment (latte macchiato) 12 Milk heating attachment GB Appliance description Starting up • Carefully rinse the inside of the appliance under running water (see page 26).
Preparation of coffee- & milk specialities Warm milk froth Cold milk froth Filling quantity: 100 ml - 200 ml Heating milk Filling quantity: 100 ml - 400 ml Open the lid by turning it anti-clockwise (Fig. B) and remove it. Pour the desired amount of milk into the container. Pay attention to the min. and max. filling levels on the container (Fig. C). Frothed milk expands and will overflow if it is filled above the max. level. Screw the milk froth attachment (Fig. A, No. 10/11) onto the frothing rod.
– – – Use refrigerated milk to prepare your milk froth (7-8 °C). You can use all kinds of standard milk variants (independent of fat level). Even soy or lactose free milk can be frothed perfectly with Melitta® Cremio. The protein content is relevant for an excellent milk froth result. The higher the proportion the more stable and fine pored the result. Keep the lid closed during preparation. Press the button again or remove the appliance from (Fig. A, No.
Cleaning and maintenance • Carefully rinse the inside of the appliance under running water. • Clean the appliance with a soft, damp cloth and ordinary washing up liquid to avoid a damaging of the non-stick coating inside the container. Make sure that the silvercoloured contacts on the handle do not get wet. • Carefully rinse the attachment under running water. Caution! The motor is located in the lid and can be damaged if it gets wet. – Never rinse the lid under running water.
Problem Cause Solution After pressing a button, the indicator (Fig. A, light No. 6) flashes three times. The lid is not closed properly. Close the lid prop erly. The closed lid must be aligned with the handle. The appliance is too hot. Let the appliance cool down. After pressing a button, the indicator (Fig. A, light No. 7) flashes three times and after that switches off, the appliance doesn't start. The lid is not closed properly. Close the lid properly.
Problem The milk frother stops the process and the indicator lamps are flashing three times. Cause Motor is overloaded. Solution Please contact the customer service. Contact the Melitta® customer service (+49 571 86 1900) if the above mentioned measures do not help to solve the problem. Disposal Please dispose the appliance in an environmentally responsible manner via suitable collection systems. 28 Heft_Cremio_2.3.indd 28 21.12.
In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by Melitta® due to his consulting competence, we grant a manufacturer's guarantee under the following conditions: GB Terms of guarantee 1. The guarantee period begins with the day the product was sold to the end user. The guarantee is 24 months. The purchase date of the device must be verified by a purchase receipt.
30 Heft_Cremio_2.3.indd 30 21.12.
